Application for ICS or Thermosiphon System Testing

To Apply for ICS or Theromsiphon System Testing first read FSEC Standard 105-05 1. If applying for certification you must first complete the random selection process as detailed in FSEC Document 102-05 section 5.1 2.Complete and submit: System Testing Application Form 140KB Adobe Acrobat File 3. Provide drawings which show sufficient detail to accurately represent: a. Collector aperture cover plate dimension and mounting detail. b. Absorber plate dimensions including thickness, location and spacing of fluid flow paths; flow pattern: cross-section dimensions, shape and number of flow channels; tube wall thickness; and plat-to-tube heat transfer provisions. c. Collector enclosure dimensions, provisions for attaching absorber and plate, and size and location of holes. d. Collector assembly detail specifying fasteners and other attachment methods indicating overall dimensions. e. Tank inner and outer dimensions and diagram detailing the dimensions and location of any heat exchanger or other components. f. Diagram detailing plumbing, including pipe type and size, fittings, any special valves or components. 4. Installation instructions and operation manual. 5. Working fluid and/or flow rate recommendations or restrictions. If a heat transfer fluid other than water is to be used, thermal conductivity and toxicity shall be provided. 4. Submit: Signed Agreement for Solar Collector Testing

Fees for Testing and Certification
Standard fees for testing and solar collector certification by the Florida Solar Energy Center will be shown in the following schedule. For FSEC to conduct other tests, evaluations or administrative actions in a combination not covered by the fee schedule, a fee will be established consistent with the fees listed above.
	Fee Schedule for Solar Thermal Testing and Certification